Welcome to  Shandong Mason Environmental Protection Technology Co., Ltd.!---Focus on the field of prefabricated green building products!

1
1

1

2
2

2

3
3

3

4
4

4

Products

Current location:
Homepage
>
>
>
Lightweight interior and exterior wall panels
Number of views:
1000

Lightweight interior and exterior wall panels

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
Description
Parameters

Light wallboard is the short name of "the national standard GB/T23451-2009" construction of lightweight partition board , refers to the use of lightweight materials or light structure, two side with tenons mortise and seam slot, surface density is not greater than the standard specified value (90 kg / : 90 board, 110 kg / : 120 board) used in industrial and civil construction of bearing in the partition wall of prefabricated plate, the use of raw materials should be consistent with JG/T169-2016 standard.

We could not find any corresponding parameters, please add them to the properties table

Related products

Tips: Is the interface agent the same as the interface mortar?
For example: (1) Porous and strong water-absorbing materials (aerated concrete, gypsum board, wood, etc.); (2) Smooth and low-water-absorbing materials (cast concrete, etc.)
[Construction] Flat coating construction process of elastic coating for exterior wall
Let the new cement on the wall mature for at least one month to reduce the alkalinity of the wall appropriately and make the wall dry. The moisture content of the wall must be less than 10%; if the ambient temperature is low, the wall is ready to dry The time has been extended accordingly.
The quality supervision department has taken action, and the public wall requires the use of water-resistant putty
Shandong Weihai Quality Supervision Station requires that from October 1, 2016, the stairwells and corridors of new residential construction projects need to be scraped on the walls of public parts on the ground
【Construction】Scrape putty in this way so that the wall will not be hollow and cracked
The putty layer is hollow and blistered, mainly due to the presence of gas between the base layer and the putty layer. There is a dense layer between the base layer and the putty layer.

Intersection of Sanyi Street and Renhe Road, Eastern Development Zone, Pingyuan County, Dezhou City, Shandong Province

Online Messages

Username used for comment:
Online Messages
Description:

版权信息

Time of issue:2020-12-29 13:52:21

© 2020 Shandong Mason Environmental Protection Technology Co., Ltd. All Rights Reserved ICP:鲁ICP备0808751号  Powered by www.300.cn